Canon VB-M600VE - Manual (Page 143)

List of Log Messages
8
-13
8
A
ppendix
„ HTTP Server Messages
H143 User name specification error [notice]
H144 Password specification error [notice]
H145 Connection denied due to host access limitation
[notice]
H201 Timeout disconnect [warning]
„ System messages
S001 System started [info]
S002 System settings changed [info]
S010 Event service started [info]
S011 Event service shut down [info]
S012 External device service started [info]
S013 External device service shut down [info]
S014 Timer service started [info]
S015 Timer service shut down [info]
S070 Change to SSL certificate [info]
S220 PAN/TILT operation warning [warning] (VB-M40)
Description (http_auth.c.XXX) get_password failed
(H143)
Meaning An unknown user was specified in user
authentication.
Description (http_auth.c.XXX) password doesn't match
for %1 %2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
Description (mod_haccess.c.XXX) host %1 access
denied (H145)
%1 IP address
Meaning Connection was denied due to access
limitation imposed on the host.
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
Description starting paramd (S001)
Meaning Parameter management module started.
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
Description starting event (S010)
Meaning The event service was started.
Description shutdown event (S011)
Meaning The event service was shut down.
Description starting extio (S012)
Meaning The external device input/output service
was started.
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
Description starting timer (S014)
Meaning The timer service was started.
Description shutdown timer (S015)
Meaning The timer service was shut down.
Description ssl: succeeded to %1 certificate (S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/deleted/
restored
Countermeasure None
Description %1 warning detected. [%2] (S220)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching the
dome, etc.