Brother HL-7050N - Manual (Page 92)

APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 4
YL4US_FAX2800MFC4800-FM5.5
How to Select the Print Server
(AppleTalk/EtherTalk)
Once the print server is connected on your network and the printer is
powered on, the Brother print server’s AppleTalk service name
(default is
BRN_xxxxxx_P1_AT , where xxxxxx is the last six digits
of the Ethernet address (MAC address) should appear in the
Chooser.
1 Open the Chooser from the Apple Menu on the Macintosh,
and then click on the LaserWriter icon (if necessary, select the
appropriate AppleTalk zone from the Network Control
Panel).
Figure 2 Macintosh Chooser
2 Click on the appropriate print server and close the Chooser
You can find the service name and MAC address by printing out the
printer configuration page. Refer to the Quick Setup Guide for
information on how to print the configuration page on your print
server.