Brother HL-7050N - Manual (Page 16)

UNIX PRINTING 1 - 5
YL4US_FAX2800MFC4800-FM5.5
%lpc status
laser1:
queuing is enabled
printing is enabled
no entries
no daemon present
Users of AT&T-compatible UNIX systems can generally use
the lpstat or rlpstat commands to obtain similar status
information. Because this procedure varies from system to
system, refer to your system documentation for the exact
usage.
4 Skip this section if you have completed Step 3, unless you have
an SCO UNIX system.
Make sure this information is added to the end of the printcap
file. Also make sure that the last character in the printcap file
is a colon ":".
This will create a queue named laser1 on the host computer
that communicates to a Brother print server with a node
name (rm) of BRN_310107 and a service name (rp) of
TEXT_P1 printing text files to a Brother printer through spool
directory
/usr/spool/lpd/laser1 . If you are printing
binary graphics files, you would use the service BINARY_P1
instead of TEXT_P1.
The rm and rp options are not available on some UNIX
systems, so if necessary check your documentation to
determine the equivalent options.
Users of Berkeley-compatible UNIX systems can use the lpc
command to obtain the printer status: