Ibm rs/6000 aix configuration, Ibm rs/6000 aix configuration -8 – Brother HL-7050N User Manual
Page 19
1 - 8 UNIX PRINTING
YL4US_FAX2800MFC4800-FM5.5
Earlier versions of HP/UX use similar procedures to 10.xx users:
1
Enter sam and select Peripheral Devices and then Add
Remote Printer (not Networked printer).
2
Enter the following remote printer settings (the other settings do
not matter):
n
Line printer name (user-selectable).
n
Remote system name (the print server name; must match
what is in hosts file or use print server IP address).
n
Remote printer queue (Printserver binary or text service
name, e.g. BINARY_P1 or TEXT_P1).
n
Remote Printer is on a BSD System (Yes).
IBM RS/6000 AIX Configuration
The RS/6000 AIX operating system uses the smit program to set up
the remote printer. The procedure is as follows for AIX 4.0 and later:
1
Enter smit and select devices.
2
Select Printer/Plotter.
3
Select Print Spooling.
4
Select Add a Print Queue.
5
Select Remote.
6
Enter the following Remote Printer Settings:
Name of queue (user selectable)
Host name of Remote Printer (print server name; must match
name in
/etc/hosts
file or use the print server IP address)
Name of queue on remote printer (print server binary or text
service name, eg. BINARY_P1 or TEXT_P1).
Type of print spooler. BSD (press the LIST button and choose
BSD)