Sco unix configuration, Sco unix configuration -11 – Brother HL-7050N User Manual
Page 22
UNIX PRINTING 1 - 11
YL4US_FAX2800MFC4800-FM5.5
SCO UNIX Configuration
To configure a printer in version Version 5.x of SCO Unix, use the
SCOADMIN program.
1
Select Printers and then Print Manager.
2
On the menu select Printer and then Add Remote followed by
Unix...
3
Enter the IP address of the print server, and type in the name of
the printer that will be used to spool to.
4
Deselect Use External remote Printing Protocol...
5
To eject the printed page, add the command
rp=lpaf
to the
/
etc/printcap
file.
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print
servers. You must first configure the
/etc/hosts
and
/etc/
printcap
files as described in step 2. Then run the sysadmsh
program as follows:
1
Select Printers.
2
Select Configure.
3
Select Add.
4
Enter the name of the print queue you entered in the
/etc/
printcap
file as the Printer name.
5
Enter anything as the Comment, and Class name.
6
For the Use printer interface select Existing.
7
Press the F3 key to get a list of available interfaces, and select
the desired one as the Name of interface using the cursor keys
(
Dumb
is a good choice).
8
Select Direct as the Connection.
9
Enter the desired Device name (
/dev/lp
generally works).