Brother HL-7050N - Manual (Page 111)

9 - 6 LAT NETWORK CONFIGURATION
YL4US_FAX2800MFC4800-FM5.5
d Click Add, go to the List of Printers, select the desired
printer type, and click Install. If desired, click Set as Default
Printer.
e Click Connect and select the desired port (e.g., LPT1).
Click Network and select the port you chose above and type
in the network path (
\\node\service , where node is the
DECnet node name and service is the service name
picked previously; for example, \\VAX\LASER ).
f Click Connect (the Current Printer Connection should
show the port and the network path that you selected).
g Click Close, OK, Close, and Exit to get out of the Print
Manager.