Brother HL-7050N - Manual (Page 110)

LAT NETWORK CONFIGURATION 9 - 5
YL4US_FAX2800MFC4800-FM5.5
PATHWORKS for DOS Configuration
To configure the print server for PATHWORKS for DOS:
1 Create a VMS queue as previously described.
2 Run PCSA_MANAGER on the VMS system.
a Type MENU to get the PCSA menu.
b Select SERVICE OPTIONS
c Select ADD SERVICE (do not use the ADD PRINTER
QUEUE option as this will add a PCL printer reset that will
affect PostScript printing.
d Select PRINTER SERVICE.
e Enter service name (pick a name).
f Enter VMS queue name (previously defined).
g Enter VMS form name (use the default if you do not have a
specific form defined).
3 Perform the following steps on the PC:
a If you are using DOS, type the command USE
LPTx:\\node\service at the DOS prompt, where x is the
PC parallel port number, node is the DECnet node name and
service is the service name picked previously. For
example:
USE LPT1:\\VAX\LASER
You may delete this print service by typing LATCP at the C:> prompt
and then entering the command DELETE LPT1:
b If you are using Windows ® 3.1x, make sure that you have
selected DEC PATHWORKS as the network under the
Windows
® Setup icon.
c Then click on the Print Manager icon, select Options and
then Printer Setup.