beautypg.com

Standard tcp/ip port printing, Windows, Standard tcp/ip port printing -2 – Brother HL-7050N User Manual

Page 28

background image

TCP/IP PRINTING 2 - 2

YL4US_FAX2800MFC4800-FM5.5

6

The default name for a Brother print server is usually

BRN_xxxxxx

(where

xxxxxx

is the last six digits of the

Ethernet address of the print server).

Windows

®

NT 3.5x/NT 4.0/2000/XP (TCP/IP)

Configuration

If you have not already done so, install the TCP/IP protocol onto your
Windows

®

NT system. This is done via the Network icon in the

Control Panel window of the Windows

®

NT system (the Control

Panel is in the Main window on NT 3.5x systems, or use the Start
button on NT 4.0 to access the Settings/Control Panel menu). The
default configuration of Windows

®

2000/XP automatically installs the

TCP/IP protocol. Refer to the appropriate section in this chapter for
more information.

Windows

®

2000/XP Printing

(Printer Driver not yet installed)

By default, Windows

®

2000/XP systems install with all the necessary

software required for you to be able to print. This chapter describes
the two most commonly used configurations, Standard TCP/IP Port
printing and IPP (Internet Printing Protocol). If you have already
installed the printer driver, jump to the printer driver already
installed
section.

Standard TCP/IP Port Printing

1

From the Printers folder select Add Printer. The Add Printer
Wizard
will now start. Click on Next.

2

Now select the Local Printer option and deselect the
Automatically detect and install my Plug and Play printer
option.

3

Click on Next.

This manual is related to the following products: