Brother HL-7050N - Manual (Page 81)

6 - 15 NOVELL NETWARE PRINTING
YL4US_FAX2800MFC4800-FM5.5
11 Press INSERT to create a new queue on the file server, type the
new queue name and press ENTER. The name does not have
to be related to the name of the print server resources, but
should be short and convenient for users to remember.
12 Make sure that the new queue name is highlighted, and then
press ENTER to configure the queue.
13 Select Queue Servers (in NetWare 4.1x, this item is called
print servers) and press ENTER to specify which network print
servers can print jobs from this print queue. The list will be
empty, since none have been selected yet if this is a new queue.
14 Press INSERT to get a list of the queue server candidates and
select the print server service name from step 9, Press ENTER.
15 Press ESCAPE several times until you return to the Available
Options menu.
Force the print server to rescan file servers for print jobs. You may
either turn the printer off and on again or you may use the
BRCONFIG or TELNET command
SET NETWARE RESCAN to make
the print server rescan for file servers.