NORD Drivesystems BU0510 - Manual (Page 46)

POSICON position control for NORD frequency inverters, SK 530E and above
46 Subject to technical alterations BU 0510 GB-3911
Parameter
{factory setting}
Setting value / Description / Note Device Supervisor Parameter set
P480 [-01]
...
[-12]
Funct. BusIO In Bits
(Bus I/O In Bits function)
S
0 ... 74
{ all 0 }
The Bus I/O In Bits are perceived as digital inputs. They can be set to the same functions
(P420...425).
In association with the IO extension modules (e.g. SK TU4-IOE) with the SK 54xE these I/O bits
can also process their input signals.
[-01] = Bus I/O In Bit 0 (or SK54xE and above: + DI1 of the second SK xU4-IOE)
[-02] = Bus I/O In Bit 1 (or SK54xE and above: + DI2 of the second SK xU4-IOE)
[-03] = Bus I/O In Bit 2 (or SK54xE and above: + DI3 of the second SK xU4-IOE)
[-04] = Bus I/O In Bit 3 (or SK54xE and above: + DI4 of the second SK xU4-IOE)
[-05] = Bus I/O In Bit 4 (or SK54xE and above: + DI1 of the first SK xU4-IOE)
[-06] = Bus I/O In Bit 5 (or SK54xE and above: + DI2 of the first SK xU4-IOE)
[-07] = Bus I/O In Bit 6 (or SK54xE and above: + DI3 of the first SK xU4-IOE)
[-08] = Bus I/O In Bit 7 (or SK54xE and above: + DI4 of the first SK xU4-IOE)
[-09] = Flag 1
[-10] = Flag 2
[-11] = Bit 8 BUS control word
[-12] = Bit 9 BUS control word
The possible functions for the Bus In Bits can be found in the table of functions for the digital
inputs P420...425.
P481 [-01]
...
[-10]
Funct. BusIO Out Bits
(Function of Bus I/O Out Bits)
S
0 ... 39
{ all 0 }
The bus I/O Out bits are perceived as multi-function relay outputs. They can be set to the same
functions (P434; P441; P450; P455).
In association with the IO extension modules (e.g. SK TU4-IOE) with the SK 54xE these I/O bits
can also control their digital outputs.
[-01] = Bus I/O Out Bit 0
[-02] = Bus I/O Out Bit 1
[-03] = Bus I/O Out Bit 2
[-04] = Bus I/O Out Bit 3
[-05] = Bus I/O Out Bit 4 (or SK54xE and above: + DO1 of the first SK xU4-IOE)
[-06] = Bus I/O Out Bit 5 (or SK54xE and above: + DO2 of the first SK xU4-IOE)
[-07] = Bus I/O Out Bit 6 / Flag 1 (or SK54xE and above: + DO1 of the second SK xU4-IOE)
[-08] = Bus I/O Out Bit 7 / Flag 2 (or SK54xE and above: + DO2 of the second SK xU4-IOE)
[-09] = Bit 10 BUS status word
[-10] = Bit 13 BUS status word
The possible functions for the Bus Out Bits can be found in the table of functions for the digital
outputs or the relays P434.