NORD Drivesystems BU0510 User Manual

Page 40

POSICON position control for NORD frequency inverters, SK 530E and above

Subject to technical alterations

BU 0510 GB-3911

Parameter
{factory setting}

Setting value / Description / Note

Device

Supervisor

Parameter

set

P405

Analog input 2 function

(Analog input 2 function)

up to SK

535E

0 ... 82

{ 0 }

This parameter is identical to P400.

P418

Analog output 1 function

(Analog output 1 function)

up to SK

535E

0 ... 52

{ 0 }

Analog functions (max. load: 5mA analog, 20mA digital):

An analog voltage (0 ... +10 Volt) can be taken from the control terminals (max. 5mA). Various
functions are available, whereby:

0 Volt analog voltage always corresponds to 0% of the selected value.

10 V always corresponds to the motor nominal values (unless otherwise stated) multiplied by the
P419 standardisation factor, e.g.:



100%

P419

value

nominal

Motor

10Volt





The possible functions are listed in the following tables.

P418

[-01]

...

[-03]

Analog output func.

(Analog output function)

SK 540E and

above

0 ... 52

{ all 0 }

[-01] = Analog output: analog output integrated into the FI

[-02] = First IOE, "External analog output of first IOE": Analog output 1 of thefirst IO

extension (SK xU4-IOE)

[-03] = Second IOE, "External analog output of second IOE": Analog output of thesecond IO