NORD Drivesystems BU0280 User Manual

Page 15

2 Assembly and installation

BU 0280 GB

Subject to technical amendments

2.1.1

Features of DeviceNet modules

Bus Module

Description

Data

DeviceNet module

SK CU4-DEV

Part No. 275271002 (IP20)

This option enables control of the NORDAC SK
200E via DeviceNet.
This option is integrated into the connection unit of
the frequency inverter.

Baud rate:

up to 500 kBaud

Connection:

16-terminal screw terminal bar

2x digital inputs:

Low: 0-5V, High: 11-30V

DeviceNet module*

SK TU4-DEV(-C)

Part No. 275281102 (IP55)
Part No. 275281152 (IP66)

This option enables control of the NORDAC SK
200E via DeviceNet.
This option is installed externally to the frequency
inverter.
According to the installation location, at least one
"BUS connection unit"* is required.

Baud rate:

up to 500 kBaud

Connection:

36 pin spring terminal bar of the
“ BUS connection unit” *

4x digital inputs:

Low: 0-5V, High: 11-30V

2x Digital outputs:

0/24V

DeviceNet module with
M12*)

SK TU4-DEV-M12(-C)

Part No. 275281202 (IP55)
Part No. 275281252 (IP66)

As for SK TU4-DEV(-C) but with
additional:
6x M12 sockets for the
connection of up to 4 sensors
and 2 actuators via 5 pin M12
round plug connectors (B coded)

Connection unit for TU4

SK TI4-TU-BUS

Part No. 275280000 (IP55)
Part No. 275280500 (IP66)

The connection unit is always required in order to
use an external technology unit (SK TU4...). This
implements the connection of the technology unit to
the SK 200E or the wall-mounting kit.

Connection:

36 pin spring terminal bar

36x 2.5mm

AWG 26-14
spring terminals

TU4 wall-mounting kit

SK TIE4-WMK-TU

Part. No. 275274002

With the wall mounting kit, a technology unit can be
used/installed separately from the SK 200E.

*) in order to use the TU4 modules, a suitable SK TI4-TU-BUS connection unit must always be available!