Badger Meter M-Series M2000 - Manual (Page 24)

SECURITY
The M2000 security feature gives you the option to restrict access to the meter by way of a five-digit Personal Identification
Number (PIN) The system administrator can set up a single PIN for each of the three different levels of access:
• Administration – allows access to all M2000 menu configuration screens
• Service – allows access to service-level and user-level menu configuration screens
• User – allows access only to user-level menu configuration screens
Not all levels of access need to be set If no PINs are set up, any M2000 user will have access to all functions
NOTE: N The security settings will also apply to remote access All remote writes to the meter will be blocked unless the user is
remotely logged in
Setting the Administration PIN
Users logged in with the Administration PIN have access to all M2000 menu configuration screens
To set the administrator's PIN, follow these steps from the Advanced menu:
1 Select Security to view the Security menu
2 Select Set Admin PIN to view the Admin PIN display
3 Set the five-digit PIN number to the desired value
4 Press [E] to save the PIN and to return to the Security menu
Setting the Service PIN
Users logged in with the Service PIN have access to service level menu configuration screens Service users will not have
access to administrative screens
NOTE: N In order to set a service-level PIN, you must first set up an administration PIN
To set the service PIN, follow these steps from the Advanced menu:
1 Select Security to view the Security menu
2 Select Set Service PIN to view the Service PIN display
3 Set the five-digit PIN number to the desired value
4 Press [E] to save the PIN and to return to the Security menu
Setting the User PIN
Users logged in with this User PIN have access to user-level procedures Users will not have access to administrative or service
screens
NOTE: N In order to set a user-level PIN, you must first set up an administration PIN and a service PIN
To set the user's PIN, follow these steps from the Advanced menu:
1 Select Security to view the Security menu
2 Select Set User PIN to view the User PIN display
3 Set the five-digit PIN number to the desired value
4 Press [E] to save the PIN and to return to the Security menu
M-Series® M2000 Electromagnetic Flow Meter
Page 24 August 2012