Badger Meter M-Series M2000 - Manual (Page 21)

PROGRAMMING THE M2000
The M2000 amplifier comes preprogrammed from the factory Typically, you will not need to do any additional programming
However, to take advantage of special features, you can program the meter for your specific needs If you will be
programming the meter, familiarize yourself with the M2000 Function Buttons and follow the procedures outlined below
Displays
There are two types of displays on the M2000:
• Menu Selection
• Numeric Entry
Menu Selection Display
Menu selection displays will appear in the following format:
DISPLAY TITLE
>Menu Selection 1
Menu Selection 2
DIRECTIONS LINE
START MENU
>Exit this Menu
Main Menu
MORE:
↑
,
↓
ENTER:>
Display format Example menu
The top line shows the title of the display screen Below that are two visible menu selections The bottom line provides
directions for user input
Typically, a menu contains more options than will fit in the two menu selection lines Press the [↑] and [↓] buttons to scroll the
display text up and down one line at a time When the arrow is pointed to your desired menu option, press [E] to select the
item and open its display
Numeric Entry Display
Numeric entry displays will appear in the following format:
DISPLAY TITLE
Description Line
Numeric Value
DIRECTIONS LINE
LOW FLOW CUTOFF
% of 300.000 GPM
2.00%
CHG: +,- NEXT:E
Display format Example numeric entry display
The top line shows the title of the display screen The second line is a description of the value The third line shows the
current value The bottom line provides directions for user input
Installation & Operation Manual
Page 21 August 2012