KROHNE H250 M40 FOUNDATION FIELDBUS - Manual (Page 72)

4
OPERATION
72
H250 M40
www.krohne.com 02/2014 - 4001208201 - AD H250 M40 FF R02 en
Update State R A discrete enumeration which gives an indication of whether
the alert has been reported.
Uninitialized
Setting:
Uninitialized / Reported / Not Reported
Time Stamp R The time when evaluation of the block was started and a
change in alarm/event state was detected that is unreported.
The time stamp value will be maintained constant until alert
confirmation has been received - even if another change of
state occurs.
Uninitialized
Setting:
MM / DD / YY (Month / Day / Year)
HH:MM:SS (Hour:Minute:Second)
Static Revision R The static revision of the block whose static parameter was
changed and is being reported. It is possible for the present
value of static revision to be greater than this because static
can be changed at any time.
0
Relative Index R The OD index of the static parameter whose change caused
this alert, minus the FB starting index. If the update event was
caused by a write to multiple parameters at the same time,
then this attribute will be zero.
0
Proportional Integral Derivative Block
Parameter
DD Name Access Description
settings Initial Value
AD_H250_M40_FF_R02_en_4001208201_PRT.book Page 72 Friday, February 21, 2014 11:25 AM