KROHNE UFM 600T EN - Manual (Page 90)

APPENDIX 4 : Exponential Notation
Most values have to be entered in the exponential notation as will be
made clear by the message displayed.
Exponential Notation: Y.YYYY E±Z
This indicates that Y.YYYY should have a value between
1.0000 and 9.9999 (1.0000 < Y.YYYY < 9.9999).
The value of Z gives the multiplication factor, e.g.:
Z = +0 indicates Y.YYYY x 1
Z = +1 indicates Y.YYYY x 10
Z = +2 indicates Y.YYYY x 100
Z = +3 indicates Y.YYYY x 1000
etc.
For small values the exponent Z will be negative.
(Press ARROW UP when E is blinking)
Z gives the dividing factor, e.g.:
Z = -1 indicates Y.YYYY / 10
Z = -2 indicates Y.YYYY / 100
Z = -3 indicates Y.YYYY / 1000
etc.
Examples:
program: 1.0345 as 1.0345 E+0
16.167 as 1.6167 E+1
550.12 as 5.5012 E+2
2987.1 as 2.9871 E+3
and with negative exponents:
0.335 as 3.3500 E-1
0.0205 as 2.0500 E-2
0.0015 as 1.5000 E-3
87