KROHNE UFM 600T EN - Manual (Page 61)

3.2.3 UNIT TOTAL : unit for totalizers
(only if a totalizer has been set in 3.2.2)
Select unit for the totalizers using the key and press
to store:
m3 :
Liter :
US G :
------- : User defined unit
3.2.4 ERROR MSG. : Display Error Messages
Determine whether error messages should be displayed and
if so, what type of error messages; select a message option
using the key and press to store:
NO MESSAGE :
US ERROR : Only display of errors
related to the measure-
ment itself
TOT. ERROR : Display of totalizer
errors only
ALL ERROR :
3.2.5 DISP. TRAN. T : Display Transit Time
The transit time is the time lapse between transmission of the
acoustic signal by one transducer and the reception of the
signal by the opposite transducer.
Select display of the transit time; choose either YES or NO
using the key and press to store.
58
ALTOSONIC
Programming mode
UFM 600 T