KROHNE UFM 600T EN - Manual (Page 11)

B.2 Measuring System
A microprocessor controls the transducers via an analog/
digital interface and calculates the actual flow.
The control program is stored in EPROM memory.
Parameters for the application and processing the data are
entered via the keyboard.
A liquid crystal display is used for the indication of all
measuring data.
All data collected in the field can be stored in RAM memory
and transferred to an IBM compatible PC via an RS 232 out-
put; the same applies to the parameter settings.
Both current and frequency output signals are available for
auxiliary readout and/or control purposes.
Figure B.2 shows a diagram of the flowsystem.
10
ALTOSONIC
System Description
UFM 600 T