KROHNE UFM 600T EN - Manual (Page 32)

PIPE MAT.
Program the sonic velocity of the pipe material.
The following 5 options are preprogrammed (or will reappear
after running 3.5.8 DEFAULT SET, see chapter D):
STEEL : 3.1700 E 3 m/s
ST. STEEL : 3.1200 E 3 m/s
IRON : 2.1200 E 3 m/s
PVC : 2.1200 E 3 m/s
Other : 1.5000 E 3 m/s
All five option positions can be reprogrammed completely
according to the user´s requirements (names and sonic
velocities).
The sonic velocity can only be programmed in m/s.
Range:
1.5000 E 3 m/s
≤ Sonic velocity ≤ 4.7500 E 3 m/s
See appendix 1 for sonic velocities of the most frequently
used pipe materials.
LINING
Select YES or NO depending on whether or not the pipe is
provided with a lining.
When NO is selected the parameters LINING THICKNESS
and LINING MATERIAL can not be programmed.
LINING TH.
(does not appear on display when lining = "NO" )
The lining thickness can be entered either in mm or in inches.
Range:
1.0000 E-1 mm
≤ LINING THICKNESS ≤ 5.0000 E 1 mm
3.9370 E-3 inch
≤ LINING THICKNESS ≤ 1.9685 E 0 inch
31