KROHNE UFM 600T EN - Manual (Page 72)

3.6.0 COMM. DATA : set RS 232 output /
store
3.6.1 OUTP. PARAM.
With this function all programmed parameters can be sent to
a PC via the RS 232 output.
NOTE: No error message is given if a communication error (no
RS 232 response) occurs!
Select YES and press to start the output.
3.6.2 OUTP. DATA
With this function all collected data stored in the RAM can be
sent to a PC via the RS 232 output.
NOTE: No error message is given if a communication error (no
RS 232 response) occurs!
Select YES and press to start the output.
3.6.3 SEL. COMM.
With this function the output medium can be selected to
which the data is sent as programmed in 3.2.0 and 3.6.4.;
the intervals are programmed in 3.6.4.
The options are:
OFF : No output at all (only on LCD).
BOTH : Data is stored in the RAM as well as
sent to the RS 232 output.
OUTPUT : Data is send to the RS 232 output
only.
STORE : Data is stored in the RAM only.
For settings of the PC terminal program see: C 4.3.
69