Altosonic – KROHNE UFM 600T EN User Manual

Page 71

Text mode
Original mode

3.5.8 DEFAULT SET

If this function is used all parameters will be reprogrammed
to default settings (see Appendix 5).
(NOTE: factory settings are not affected by this function)

NOTE:

The Date, Time and Location data will be lost, too !!

This function should only be used to restart programming if
the cause of a PARAMERROR can not be found; it offers a
start with no error messages as far as the parameters are
concerned.

3.5.9 SOFTW. V. NR.

This function can be entered to view the number of the cur-
rent software version.
No action can be taken here.

ALTOSONIC

Programming mode

UFM 600 T