KROHNE UFM 600T EN - Manual (Page 78)

4.4.1 L.F. CUTOFF
4.4.2 CUTOFF ON
4.4.3 CUTOFF OFF
4.5.0 F>10KHZ Output frequency is too high,
must be less than 10kHz
4.5.1 FULL SCALE
4.5.2 PULSOUTP.
4.5.3 PULSRATE
4.5.4 PULS/UNIT
4.6.0 APPL.DATA Programmed sonic velocities are not
within the specified range
4.6.1 PIPE MAT.
4.6.2 LIQUID
4.6.3 LINING MAT.
4.7.0 FREQ.OUTPUT The combination of F-Function and
Pulsoutput is not feasible
4.7.1 FUNCTION F
4.7.2 PULSOUTP.
Activate the submenus and functions as described in section
D.2.
After the correct parameter values have been entered the
PARAMERROR menu can be exited by pressing the key
7 times; the parameters are checked and saved and the pro-
gram stops at the beginning of the Start Up menu.
NOTE: Instead of activating the PARAMERROR menu the
INSTALLATION or TEST menus can be entered by using the
key.
75