KROHNE UFM 600T EN - Manual (Page 17)

B.5 Transducers and Mountings (see Fig. B.5)
Fig. B.5 : Transducers, signal converter and auxillary items
Two mounting rails are clamped against the pipe wall by two
straps.
The transducers can slide inside the mounting rails to obtain
the correct distance between them. The transducers are then
tightened firmly against the pipe wall.
Coupling grease is used between the transducers and the
pipe wall to provide a good transfer of the ultrasound signal
through the pipe material.
The transducers are connected to the control unit by means
of two shielded cables.
16
ALTOSONIC
System description
UFM 600 T