KROHNE UFM 600T EN - Manual (Page 23)

Mounting Procedure:
a Severe rust or thick coatings have to be removed from
the pipe where the transducers will be installed.
b Slide the securing straps through the slots on both
ends of each mounting rail (see fig. C.1).
Fig. C.1 : Mounting rail
c Attach the rails on opposite sides of the pipe such that
the large slots point in opposite directions (see fig. C.2).
Fig. C.2 : Mounting rails fitted on the pipe
22
ALTOSONIC
Operation
UFM 600 T