Acura 2011 TL - Manual (Page 90)

If there is a problem with your
vehicle, for example the engine oil
level is low or a door is not fully
closed, the multi-information display
will show you the problem. It does
this by interrupting the current
display with one or more messages.
The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go off until the problem(s)
is corrected.
You will also hear a beep when the
system message comes on for the
first time.
Most of the messages are displayed
for about 5 seconds, and then the
normal display returns. If there are
several system messages to be
shown, the display switches these
messages every 5 seconds.
To switch the message(s) before 5
seconds have elapsed, press the
INFO (
/ ) button on the steering
wheel.
Even if you press the INFO ( / )
button, some messages stay on or
come on again at regular intervals
until the problem is corrected.
If the system message indicator
remains lit on the instrument panel,
you can see the corresponding
message(s) again by pressing the
INFO (
/ ) button repeatedly.
On the next page is a list of all
messages:
CONTINUED
System Messages
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
87
SYSTEM MESSAGE INDICATOR
A/T model is shown.
10/07/29 11:50:54 31TK4620_092
2011 TL