Instrument panel indicators – Acura 2011 TL User Manual

Page 72

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.

Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages

and

This indicator has two functions:

If it comes on while driving, it
indicates that one or more of your
vehicle’s tires are significantly low
on pressure.

You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
information display (see page

Check the tire pressure monitor on
the multi-information display and
determine the cause (see page

If this happens, pull to the side of the
road when it is safe, check which tire
has lost pressure on the multi-
information display, and determine
the cause. If it is because of a flat tire,
have the flat tire repaired as soon as
possible. If two or more tires are
underinflated, call a professional
towing service. For more
information, see page

If this indicator begins to flash,
there is a problem with the tire
pressure monitoring system
(TPMS). You will also see a
‘‘CHECK TPMS SYSTEM’’
message on the multi-information
display. The indicator continues to
flash for a while (approximately 1
minute), then stays on. If this
happens, have your dealer check
the system as soon as possible.
For more information, see

Instrument Panel Indicators

Low Tire Pressure/
TPMS Indicator

Inst

nt
s

Cont

10/07/29 11:48:36 31TK4620_074

page