Acura 2011 TL - Manual (Page 52)

Tighten the tether strap as
instructed by the child seat maker.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.
Route the tether strap over the
head restraint, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted. With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt. 7.
8.
9.
1.
CONTINUED
Installing a Child Seat
Installing a Child Seat
with a Lap/ Shoulder Belt
Dr
iv
er
and
P
asseng
er
Saf
e
ty
49
TETHER STRAP HOOK
ANCHOR
COVER
10/07/29 11:46:00 31TK4620_054
2011 TL