Maintenance minder – Acura 2011 TL User Manual

Page 504

CONTINUED

Press the SEL/RESET button on the
steering wheel repeatedly to select
the engine oil life. The message
‘‘SERVICE,’’ along with ‘‘0%,’’ and the
maintenance item code are displayed
on the multi-information display
when the calculated engine oil life is
0 to 1 percent.

These messages will come on every
time you turn the ignition switch to
the ON (II) position.

If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s).

Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages

and

Pressing either INFO button (

)

switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.

Immediately have the service
performed, and make sure to reset
the display as described on page

178

181

503

Maintenance Minder

int
e

na
nce

501