Acura 2011 TL - Manual (Page 141)

To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to
or . To cancel the glare
reduction function, set the
brightness to the highest level, then
press the
button. You will hear a
beep when it is canceled.
When the brightness reaches the
maximum level, ‘‘BRIGHTNESS
MAXIMUM LEVEL’’ appears on the
display.
The level of brightness is shown on
the multi-information display while
you adjust it. It goes out 5 seconds
after you finish adjusting.
If your vehicle is equipped with the
navigation system, the navigation
system screen will also go to full
brightness. This can be helpful when
using the headlights during daylight
hours.
Instrument Panel Brightness
138
U.S. model is shown.
10/07/29 11:57:25 31TK4620_143
2011 TL