Acura 2011 TL - Manual (Page 117)

When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
When KEYLESS ACCESS BEEP is
set to ON, the beeper sounds twice
when you unlock the doors by
grabbing the drivers door handle
while carrying the remote.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘KEYLESS ACCESS LIGHT
FLASH’’ and repeat the procedure
again.
You can choose this item to
customize from ‘‘KEYLESS ACCESS
SETUP’’ by pressing the INFO
(
/ ) button repeatedly.
When you lock the doors by pushing
the door lock button while carrying
the remote, the beeper sounds once.
Keyless Access Beep
Multi-Information Display
114
10/07/29 11:54:23 31TK4620_119
2011 TL