Multi-information display – Acura 2011 TL User Manual
Page 105
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ADJUST OUTSIDE TEMP.
DISPLAY’’ and repeat the
procedure again.
You can select the reset timing of
the Trip A information: Trip A,
Average Fuel Economy A,
Average Vehicle Speed A, and
Elapsed Time A.
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO (
/
) button
repeatedly.
WITH REFUEL
The Trip A
information is reset every time you
refuel your vehicle.
MANUAL ONLY
You can reset
the Trip A information when Trip A
is displayed (see page
).
There are three reset choices you
can make:
IGN OFF
The Trip A information
is reset when you turn the ignition
switch to the LOCK (0) position.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0). For
more information, see pages
and
.
:
Trip Computer Trip A Info Reset
Multi-Information Display
102
U.S. models
Canadian models
10/07/29 11:52:59 31TK4620_107
2011 TL