Acura 2011 TL User Manual
Page 279
Use the TUNE bar to tune
the radio to a desired frequency.
Press the
side of the bar to tune
to a higher frequency, or the
side to tune to a lower
frequency. To tune with the
interface dial, push the interface
selector down, and turn the interface
dial to select Tune. Then press
ENTER on the interface selector,
and turn the interface dial to the
desired frequency. To exit the
TUNE mode, press ENTER on the
interface selector, then push the
interface selector up to go back.
The skip (seek)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side
(
or
) of the SKIP bar,
then release it.
The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN A.SEL bar, then release it.
To scan with the interface dial, push
the interface selector down, and
turn the interface dial to select
Scan, then press ENTER on the
interface selector.
Playing the AM/FM Radio (Models with navigation system)
TUNE
SKIP (SEEK)
SCAN
276
TUNE
SCAN
10/07/29 12:15:45 31TK4620_281
2011 TL