Acura 2011 TL - Manual (Page 51)

Push the button located next to
each rear head restraint to pivot
the head restraint down. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
4. 5.
6.
Installing a Child Seat
48
BUTTON
HEAD RESTRAINT
Outer seating position Rigid type Flexible type
10/07/29 11:45:51 31TK4620_053
2011 TL