Setting the clock – Acura 2011 TL User Manual
Page 377
To set the time, press the CLOCK
button until you hear a beep. The
displayed time begins to blink.
Change the hours by pressing the H
(hour) button until the numbers
advance to the desired time. Change
the minutes by pressing the M
(minute) button until the numbers
advance to the desired time.
Press the CLOCK button again to
enter the set time.
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, press and hold
the CLOCK button, then press the R
(reset) button to set the time back to
the previous hour. If the displayed
time is after the half hour, the same
procedure sets the time forward to
the beginning of the next hour.
The navigation system receives
signals from the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Refer to the navigation system
manual for how to adjust the time.
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
For example:
On models with navigation system
On models without navigation system
Setting the Clock
374
On models without navigation system
HOUR BUTTON
(PRESET 4)
CLOCK BUTTON
RESET BUTTON
(PRESET 6)
MINUTE BUTTON
(PRESET 5)
10/07/29 12:28:43 31TK4620_379
2011 TL