Acura 2011 TL - Manual (Page 115)

Press the SEL/RESET button to see
the selections. When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
To select whether the driver’s door
or all doors unlock when you open
the driver’s door with the remote or
by grabbing the door handle (while
carrying the remote), follow these
instructions:
You can choose this item to
customize from ‘‘KEYLESS ACCESS
SETUP’’ by pressing the INFO
( / ) button repeatedly.
Select DRIVER DOOR or ALL
DOORS by pressing the INFO
( / ) button, then enter your
selection by pressing the
SEL/RESET button .
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘DOOR
UNLOCK MODE’’ and repeat the
procedure again.
Door Unlock Mode
Multi-Information Display
112
10/07/29 11:54:09 31TK4620_117
2011 TL