Installing a child seat, 2011 tl – Acura 2011 TL User Manual
Page 50
![background image](/manuals/36766/50/background.png)
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the outer
rear seats.
To install a LATCH-compatible child
seat:
Move the seat belt buckle or
tongue away from the lower
anchors.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Use the pull strap to lower the
anchor cover on the lower seat
cushion that covers the LATCH
anchor holes in the seat.
The location of each lower anchor is
indicated by a small button above the
anchor point.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
1.
3.
2.
CONTINUED
Installing a Child
Seat with LATCH
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
47
LOWER ANCHORS
Outer seating position
COVERS
STRAPS
BUTTON
10/07/29 11:45:43 31TK4620_052
2011 TL