Fuses – Acura 2011 TL User Manual

Page 569

If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages

and

, or the diagram on

the fuse box lid or the fuse label,
which fuse or fuses control that
component. Check those fuses first,
but check all the fuses before
deciding that a blown fuse is not the
cause. Replace any blown fuses and
check if the device works.

Remove the cover from the

Check each of the large fuses in
the under-hood fuse box by
looking at the wire inside.
Removing these fuses requires a
Phillips-head screwdriver.

Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0). For
more information, see pages

and

Turn the ignition switch to the
LOCK (0) position.
Make sure the headlights and all
other accessories are off.

Checking and Replacing Fuses

Fuses

566

FUSE

BLOWN

10/07/29 12:54:38 31TK4620_571