Keyless access system, 2011 tl – Acura 2011 TL User Manual
Page 186
After entering the vehicle, insert the
keyless access remote into the slot
to start the engine (see page
).
If the keyless access remote battery
dies, you may have to use the built-in
key to unlock/lock the vehicle. The
built-in key is stored inside the
keyless access remote (see
).
If the steering wheel is locked, the
engine cannot start. The multi-
information display shows you the
above message and the indicator in
the engine start/stop button blinks.
To unlock the steering wheel, apply
force by turning it left and right
while pressing the engine start/stop
button at the same time.
the multi-
information display shows the
‘‘INSERT KEYLESS REMOTE
INTO SLOT’’ message, then the ‘‘TO
START ENGINE:’’ message will be
shown after you insert the remote
into the slot. Each time you press the
engine start/stop button, the
‘‘INSERT KEYLESS REMOTE
INTO SLOT’’ message is shown on
the multi-information display if the
remote is not in the slot.
When the keyless access system main
switch in the glove box is off,
To unlock the steering wheel
Keyless Access System
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
183
NOTE:
TO UNLOCK WHEEL
10/07/29 12:03:50 31TK4620_188
page
2011 TL