GW Instek USG-Series User Manual - Manual (Page 38)

USG Series User Manual
36
6. Under the GSP-730 panel set the basic spectrum
analyzer settings:
 Ref.Level: -40 ~ 20 dBm
 Scale: 1~10
 Start frequency: Dependent on the connected
USG model
 Stop Frequency: Dependent on the connected
USG model
7. Set the USG power level:
 Power Level: 0 ~ -30 dBm
Normalizing the Tracking Generator
Description The tracking generator should first be
normalized before a DUT is connected to the
USG.
Operation 1. Setup Primary RF as shown above.