GW Instek USG-Series User Manual - Manual (Page 29)

OPERATION
27
Selecting the Frequency
Description Sets the Start and Stop frequency for the USG.
Java App Display
Start frequency
Current frequency
Frequency slider
Stop frequency
Current frequency
Android App
Display
Start frequency Stop frequency
Current frequency
Current frequency
Frequency slider
Steps 1. At the bottom of the screen set the Start and
Stop frequencies for the continuous sweep,
single sweep and hopping frequency modes.
For the Single Point frequency mode, only the
Start frequency can be set.
Note
The settable frequency range is limited by the USG
model type.