GW Instek USG-Series User Manual - Manual (Page 33)

OPERATION
31
Selecting the Power Sweep
Description Sets the power level for the start and stop
frequencies.
For the sweep functions, sets the power level
from the Start frequency to the Stop frequency.
For the Single Point function, the From setting
sets the initial power level and the To setting, if
needed, sets the final power level.
For the Hopping function, the From setting sets
the power level of the Start Frequency and the
To setting set the power level at the Stop
frequency.
Java App Display
From setting
To setting
Android App
Display From settings
To settings