GW Instek USG-Series User Manual - Manual (Page 22)

USG Series User Manual
20
Tracking Generator Software Installation (Primary RF)
Description Primary RF is used in conjunction with the USG
as a tracking generator for the GSP-730.
Note:
Requirements
Only Windows operating systems (Windows XP,
Vista, 7, 8) can be used with the Primary RF
software.
Note: USB
Drivers
Before the tracking generator software can be
installed, the USG USB driver must first be
installed. See page 16 for details.
Note that the USB driver for the GSP-730’s USB
interface will be automatically installed when
installing the Primary RF software.
Note:
NI 488.2 Software
The tracking generator function requires National
Instruments NI 488.2 software to be installed. This
software is available on the NI website,
www.ni.com.
Driver installation 1. Open the User Manual CD and
click on PrimaryRF.msi.
2. The Primary RF Setup Wizard will appear.
Follow the prompts until it is all installed.
Note: If the Windows Security pop-up appears,
choose Install this driver software anyway.