GW Instek USG-Series User Manual - Manual (Page 20)

USG Series User Manual
18
6. The USG will now become available in the
device tree under PORTS (COM & LPT).
Disabling the Device Driver Signature Enforcement in
Windows 8
Description To install the USG USB driver on Windows 8
systems, you must first disable “Device driver
signature enforcement”. This procedure is
shown below.
Note
Applicable to Windows 8 only!
Steps 1. Go to the Charms bar  Click on Settings 
Click on Power  Hold the SHIFT key and click
Restart  Click Troubleshoot  Advanced
Options  Startup Settings  Restart  Select
7) Disable driver signature enforcement.
2. The PC will now restart.
3. After the PC restarts, it will now be possible to
install the USG USB driver on Windows 8 using
the procedure shown previously.