GW Instek USG-Series User Manual - Manual (Page 36)

USG Series User Manual
34
Tracking Generator Setup
Description The section will describe how to use the USG as
a tracking generator for the GSP-730.
Operation 1. Launch PrimaryRF.
2. Click on the large GSP-730 button at the top of
the window.
The spectrum analyzer settings will be shown*
when the connection to the GSP-730 is working.
Note
*Note: The above GSP-730 frequency and
amplitude settings as well as the Capture function
are not used for the tracking generator function
and are thus not used in this manual. Using these
functions is beyond the scope of this user manual.