Setup ~ android device – GW Instek USG-Series User Manual User Manual

Page 26

USG Series User Manual

3. Open USG_GUI_v1001.jar file (accessible on the

User Manual CD).



The USG_GUI_v1001 file doesn‟t need to be
installed.

4. If it is not already, turn the RF power on for the

USG.

RF Power

Setup ~ Android Device

Description

The following chapter will show how to start
up and connect the USG to an Android device.

Note

Install the USB signal generator software before
connecting the USB to your Android device. See
page 18.

Connection

1. Connect the USG to the RF port of the GSP-730.

2. Connect the Android device to a USB OTG

cable.

3. Connect the OTG cable to the USG using a Type

A-mini USB cable.