Brocade ICX 7750 Hardware Installation Guide - Manual (Page 60)

50 Brocade ICX 7750 Hardware Installation Guide
53-1003084-01
A
General specifications
Table 28 lists the DC power supply specifications for the Brocade ICX 7750-48F.
Table 29 lists the DC power supply specifications for the Brocade ICX 7750-48C.
Inrush current should be limited to a 30A peak for any initial current surge or spike of 10 ms or less
at either cold or warm start. Any additional inrush current surges or spikes in the form of AC cycles
or multiple AC cycles greater than 10 ms and less than 150 ms must not exceed a 25A peak. After
150 ms, the AC input current will be less than the rating of input fuses and the other components
within the power supply.
General specifications
Table 30 lists the general specifications for the Brocade ICX 7750.
Supported media types
For a list of supported media types, refer to the Brocade Optics Family Data Sheet .
48 VDC 274 935 Typical
48 VDC 350 1194 Maximum
TABLE 28 Brocade ICX 7750-48F DC power supply specifications
AC voltage Input watts BTU/hr Power state
48 VDC 232 792 Idle
48 VDC 250 853 Typical
48 VDC 327 1116 Maximum
TABLE 29 Brocade ICX 7750-48C DC power supply specifications
AC voltage Input watts BTU/hr Power state
48 VDC 506 1727 Idle
48 VDC 511 1744 Typical
48 VDC 586 2000 Maximum
TABLE 27 Brocade ICX 7750-26Q DC power supply specifications (Continued)
AC voltage Input watts BTU/hr Power state
TABLE 30 General specifications
Specification Description
System architecture Nonblocking shared-memory switch
System processor 1.5 GHz Freescale P2041
Switch throughput 2.56 Tbps
Forwarding bandwidth (data rate,
full duplex) 1440 Mpps