Brocade ICX 7750 Hardware Installation Guide - Manual (Page 11)

Brocade ICX 7750 Hardware Installation Guide 1
53-1003084-01
Chapter
1
Brocade ICX 7750 Overview
In this chapter
• Brocade ICX 7750 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
• Views of the Brocade ICX 7750 switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
• Brocade ICX 7750 slot and Ethernet port numbering . . . . . . . . . . . . . . . . . . 5
• Supported expansion module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• Supported transceivers and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Brocade ICX 7750 features
The Brocade ICX 7750 are high-density aggregation switches that offer both 1/10 and 10/40
Gigabit Ethernet (GbE) line rates, low latency cut-through switching, and up to
2.56 Tbps
throughput for campus LAN and classic Ethernet data center environments.
The Brocade ICX 7750 switches feature:
• Comprehensive support for a range of 1 GbE, 10 GbE, and 40 GbE optics (refer to the Brocade
Optics Family Data Sheet ).
• Dual redundant, hot-swappable 504 W AC or DC power supplies available with intake or
exhaust airflow.
• Optional hot-swappable 6-port 10/40 GbE QSFP+ expansion module.
• Four redundant, hot-swappable fan units available with intake or exhaust airflow.
• One Gigabit Ethernet port (RJ-45) and one serial management port (mini-USB) to configure and
manage the switch through the CLI.
• One USB port for the transfer of software and configuration files from an external disk drive.
• Two high-availability (HA) ports that enable up to 32 switches to be connected together to form
a CPU cluster within the stack.