Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 50)

3-2
IM 04L41B01-65EN
3.2 Receiving Setup Data from the DXP
5. Click here.
6. A progress indicator appears.
7. The message “Receiving finished” appears
and the received setup data is displayed.
1. Select [Comm.] - [Receive Setting].
3. The [Receiving data] dialog box opens.
• If the password has expired, see page 3-1.
Start reception after you change the password.
• If the data cannot be received, an error message appears.
2. If the setup data has been edited, a
save confirmation message appears.
(If the data has not been edited, the
Receiving data dialog box opens.)
For information about saving setup
data, see section 2.8.
4. Enter the IP address, user name, user ID, and password.
Note
• You can edit the setup data that you receive.
• The login information and batch/system settings are not displayed.
• For a description of creating a new setup data based on the loaded setup data, see section
2.2.