Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 37)

2-25
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
• Displayed Language
Select the language to be used on the display.
• Partial Expanded Display
If the partial expanded display is set to [Not], the partial expanded display settings of
the Meas/Math tab are void.
• Remote Controller ID (/KB1, /KB2 option)
Select the remote controller ID from [0] to [31]. Select [Off] if you do not use the
remote control terminal.
• Media FIFO
Select [ON] when using the storage area of the storage medium cyclically (FIFO).
Active Storage Change
Click here (also selectable from [Setting] - [System Mode Setting]).
Turn [ON] the setting changes that are allowed when data acquisition is in progress.
Time change
The time can be changed.
User change
Users can be registered or the registration information can be corrected.
Cal. correct change (/CC1 option)
The calibration correction setting can be changed.
Text message on cal correct (/CC1 option)
Selectable when [Cal. correct change] is set to [ON]. If the calibration correction setting is
changed when acquisition is in progress, a message “Cal Correct Setting” is written.
2.6 Configuring the System Mode