Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 18)

2-6
IM04L41B01-65EN
2.3 Setting the Measurement Channels
Select this tab
Double-click to set the channel
Difference computation
Scaling
Square root
Select the input mode
Select the range/type
Select the alarm type
Select the relay number
Select sampling count for the moving average or time
constant of the input filter.
Turn ON/OFF the partial
expanded display
Select the reference for the difference
computation
Set the span
Enter the scale Enter the scale unit
Enter the alarm value
Enter the tag name
Enter the delay period
Enter the display zone
Select the graph setting
Select the channel
display color
Initialize
Set the value to the minimum value possible
Set the value to the maximum value possible
Turn OFF at once
Copy the settings of the first channel in the selected range to all other channels
Set the selected range at once
Selecting a Range of Channels
You can select a range of channels by dragging the mouse from a channel to another channel
in the CH column. Click [CH] to reset the selected range.